Centrifugal Clutch Assembly 1" Bore and 14 Tooth fits 40/41/420 Chain Sprocket Compatible for Go Karts Mini Bike Lawnmower Engine

This clutch is used primarily on Go Kart and Mini Bike, Lawnmower and Fun Kart, also it can be used for many other applications Tooth:14; Work with #40/41/420 Chain (Chain Not included) 1″ bore Designed for 6.5hp 212CC Engines Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation Package included:1 x Go Kart Centrifugal Clutch
Features: Assembly used on all versions of the Baja Mini Bike, including the Baja Heat, Mini Baja, and the Baja Warrior.It is compatible with both the MB165 and the newer MB200 models.This item is also a perfect replacement part on much small utility 163cc 5.5 Hp and 196cc 6.5 Hp engines.
Specification: Shaft size: 1″BoreChain Size: 40/41/420ChainTooth Count: 14 ToothClutch Diameter: 107mmClutch Height: 56 mmEngagement Speed: 2300 300 RPMRecommended Engine: 2HP – 6.5HP, 1″ shaft with flat key Fitment: Honda GX160, GX200, GX 140, GX120, GC160, GC190Harbor Freight Greyhound 196ccHarbor Freight Predator 212ccBriggs and Stratton Tecumseh EnginesPerfect For Go Kart Minibike Baja Mini Bike MB165 & MB200 Oiling the clutch is extremely important Behind the snap ring, next to the sprocket teeth at the end of the clutch. There’s an internal bronze bushing behind the snap ring that requires lubrication and it’s up to you to put it there each timeIt’s a good idea to oil the chain at the same time. If the chain gets kinky from lack of oil it should be replaced before it damages the clutch sprocket.
Engines Common clutch for 3.5-7hp engines using 40/41/420ChainBriggs & Stratton and 2 – 6.5 HP with 1″ShaftTecumseh Engines 2 – 7 HP with 1″ShaftOther engines with 1″crank shaft and 3/16″ key wayMost 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brand
Also Fits For Also compatible with 1 crank shaft and 1″ key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands
Set Screws NOT Included Clutch does not need set screws as long as the end of the crankshaft is threaded to accept a bolt. Most go kart clutches are held onto the shaft with a bolt and larger washer. Extra washers if needed are used on the crankshaft to space clutch
About Sizes&Chain Fits 40/41/420ChainDurable, Maximum torque, Wear-resisting, Fast heat dissipation
Kindly Notes: The Centrifugal Clutch 1″ needs to be oiled before use.Before ordering please check your crankshaft size.Don’t put oil inside the clutch holes: The holes on the drum are to let the hot air out of the clutchWhen oil gets in the drum portion of the clutch it will cause excessive slippage, which means undue heat will be generated.Don’t try and reduce a go kart speed by limiting the travel of the gas pedal or by putting a restrictor in the carburetor to limit full rpm.When oil gets in the drum portion of the clutch it will cause excessive slippage, which means undue heat will be generated.
Ameetaa
Ameetaa
Ameetaa
Ameetaa
Sprocket
14T 10T 10T 12T
Chain
40/41/420 Chain 40/41/420 Chain 40/41/420Chain 35 Chain
Diameter
1″Bore 5/8″Bore 3/4″Bore 3/4″Bore
Dia
107mm 107mm 106.7mm 106.7mm
Height
56.6mm 55.5mm 54.4mm 56mm
Engine
212cc 212cc 212cc 212cc
Go with Chain
NO NO YES YES